|
The Coil Spring Spacer kits allow MRP springs (Enduro SL, Progressive, and Standard Steel) to be used on both MRP shocks and those from other manufacturers. There are six kits available:
Hazzard Kit “A" (500)
Fits these springs : MRP Enduro SL and Progressive
Fits these shocks : MRP Hazzard shocks with 63 or 65mm of stroke to be used with spring rates under 425 lb/in MRP Hazzard shocks with 57.5 or 60mm of stroke to be used with spring rates under 375 lb/in
Dimensions: Short spacer is 4mm, tall spacer is 8mm (overall effective length is 12mm when installed). Spring seat external diameter is 1.475”/ 37.5mm, shock seat / preload collar seat internal diameter is 1.45” / 36.8mm.
Hazzard Kit “B” (501)
Fits these springs : MRP Standard Steel
Fits these shocks : MRP Hazzard and Raze V2
Dimensions : Short spacer is 4mm, tall spacer is 8mm (overall effective length is 12mm when installed). Spring seat external diameter is 1.38”/ 35.1mm, shock seat / preload collar seat internal diameter is 1.45” / 36.8mm.
Raze / Fox Van RC & RC4 Kit (502)
Fits these springs : MRP Progressive
Fits these shocks : MRP Raze (V1, 2018 and earlier), Fox Van, DHX and RC4 shocks with a maximum of 65mm of stroke
Dimensions : Short spacer is 4mm, tall spacer is 8mm (overall effective length is 12mm when installed). Spring seat external diameter is 1.475”/ 37.5mm, shock seat / preload collar seat internal diameter is 1.35” / 34.3mm.
Fox DHX2 Kit (503)
Fits these springs : MRP Progressive
Fits these shocks : Fox DHX2 shocks with a maximum of 65mm of stroke
Rock Shox Kit (504)
Fits these springs : MRP Enduro SL and Progressive
Fits these shocks : Rock Shox Kage, Vivid and Super Deluxe Coil shocks with a maximum of 65mm of stroke.
Notes (see chart) : ** Compatible with all Enduro SL springs. Spacers may not be required for some spring rates. Incompatible with 500+ and 550+ Progressive Springs., *** Certain rates of the Enduro SL and Progressive Springs may not need spacers for these sizes. In some cases however, one or both spacers may be required to increase the effective length of the spring and accommodate the maximum amount of allowable spring preload. Measure your shock and consult our spring length and spacer heigh data to verify necessity.
Dimensions : Two 8mm spacers. Spring seat external diameter is 1.475”/ 37.5mm, shock seat / preload collar seat internal diameter is 1.45” / 36.8mm.
Cane Creek Kit (505)
Fits these springs : MRP Progressive
Fits these shocks : Cane Creek Double Barrel shocks with a maximum of 65mm of stroke and a minimum of 205mm length (eye-to-eye or eye-to-mount).
Dimensions : 3 pcs. Short spacers are 2mm, tall spacer is 8mm (overall effective length is 4-10mm when installed). Spring seat external diameter is 1.475”/ 37.5mm, shock seat / preload collar seat internal diameter is 1.43” / 36.3mm.
Please visit our website at http://www.ecomtb.com.my OR https://shopee.com.my/eco_mtb
** There is 1-3cm errors due to manual measurement. Please kindly understand.
** Actual product colour may slightly vary due to photographic lighting sources or your monitor settings.
** WE DO NOT DO COD
** ONLINE ONLY
** We support original products only.
** PRICE INDICATED IS ALREADY BEST PRICE, EXCLUDE COURIER Last Updated @ 5/18/2021 3:02:16 PM |
| 5 star |
|
0 |
| 4 star |
|
0 |
| 3 star |
|
0 |
| 2 star |
|
0 |
| 1 star |
|
0 |
